Hobbywing XRotor 40A 6s FPV 4in1 ESC BLHeli 32-DS1200
High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environment
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
Model - XRotor 40A 4in1 (20x20) BLHeli-32 DShot1200
SKU - 30902045
Application - FPVs with 130-280mm Diagonal Wheelbase
LiPo Power input - 3S-6S
Cont.Current - 40Ax4
Burst Current - 60Ax4
BEC Output - NO
Input wires - Red-14AWG-100mm/ Black-14AWG-100mm
Output Wire - No wires but solder tabs
Connectors(In/Out) - XT60 plug enclosed with package.
Weight / Size - 12g / 40x33x5mm
Firmware - Hobbywing_XRotor_BLHeli-32 Version
Throttle Calibration - Supported
ESC Programming - Stick Programming, BLHeliSuite32
DEO - Supported
OneShot Mode - Supported
Timing - Supported
Motor Rotation - Supported